| END CONNECTION DESIGN | ELBOW 1ST END |
| END CONNECTION DESIGN | STRAIGHT 2ND END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL, PLAIN 1ST END |
| CONNECTION TYPE | THREADED EXTERNAL PIPE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL HOSE 2ND END |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER RUBBER COMPOSITION AND 3RD LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER COMPOSITION |
| OUTSIDE DIAMETER | 0.680 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID AND OIL, LUBRICATING, DIESTER BASE AND AIR AND WATER SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 63.000 INCHES NOMINAL OVERALL |
| MINIMUM INSIDE BENDING RADIUS | 2.500 INCHES |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.750 INCHES 2ND END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; RESPONSE TO MRC MEDA IS FOR PETROLEUM BASED HYDRAULIC FLUIDS AND LUBRICATING OILS; OTHER MEDIA TEMP RANGES ARE, WATER, WATER/GLYCOL AND WATER/OIL EMULSION HYDRAULIC FLUIDS UP TO P 185 DEG F, AIR WITHIN A TE |
| SPECIFICATION/STANDARD DATA | SAE100R16 NATIONAL STD/SPEC |
| TEMP RATING | -40.0 FAHRENHEIT AND 257.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD CLASS | 2B 2ND END |
| THREAD SERIES DESIGNATOR | NPTF 1ST END |
| THREAD SERIES DESIGNATOR | UNJF 2ND END |