| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 5500.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | FLARE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| INSIDE DIAMETER | 0.500 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OUTSIDE DIAMETER | 0.656 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | ASSEMBLY, HOSE FUEL PIPING ((STATIC DISSIPATING) |
| MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 41.500 INCHES NOMINAL OVERALL |
| MINIMUM INSIDE BENDING RADIUS | 5.500 INCHES |
| NOMINAL THREAD SIZE | 0.875 INCHES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | LOCATION OF HOSE ASSY: PUMP INLET TO TEE UNDER AIR ELIMINATOR; HOSE HAS STAINLESS STEEL, FEMALE JIC FITTINGS ON BOTH ENDS. |
| TEMP RATING | -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |