4730-00-004-4265, SLEEVE,CLINCH,TUBE FITTING

National Stock Number:
4730-00-004-4265

Federal Supply Class:
4730

National Item Identification Number:
000044265

Description:
SLEEVE,CLINCH,TUBE FITTING

Detail:
A FLANGED CYLINDRICAL ITEM HAVING A SHARP CUTTING SURFACE ON THE INSIDE DIAMETER AT THE END OPPOSITE THE FLANGE. THE CUTTING EDGE, IN USE, IS DESIGNED TO IMBED IN THE TUBING DUE TO PRESSURE EXERTED WHEN THE OUTSIDE DIAMETER OF THE SLEEVE IS FORCED INTO AND AGAINST AN ANGULAR SEAT. THIS FIRMLY ATTACHES THE SLEEVE TO THE TUBING AND THE FLANGED END THEN SERVES AS A BEARING SURFACE FOR THE COUPLING NUT TO BRING THE TUBING INTO THE MATING FITTING.

Manufacturer Information:

4720000044265	A00AM	E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
4720000044265	SCY13	E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
4730000044265	A00AM	E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE
4730000044265	SCY13	E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
MIL-DTL-18866	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-F-18866	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS51825-3A	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

CASEHARDENING INDICATOR	CASEHARDENED
FLANGE OUTSIDE DIAMETER	0.367 INCHES MINIMUM AND 0.372 INCHES MAXIMUM
HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED	0.250 INCHES NOMINAL
OVERALL LENGTH	0.363 INCHES MINIMUM AND 0.366 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-631 FED SPEC ALL MATERIAL RESPONSES
MATERIAL	STEEL COMP 1109 OR STEEL COMP 1110 OR STEEL COMP 1116 OR STEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1119 OR STEEL COMP 1132 OR STEEL COMP 1137 OR STEEL COMP 1139 OR STEEL COMP 1140 OR STEEL COMP 1141 OR STEEL COMP 1144 OR STEEL COMP 1145 OR STEEL COMP 1146 OR STEEL COMP 1151 OR STEEL COMP 1211 OR STEEL COMP 1212 OR STEEL COMP 1213 OR STEEL COMP 1215 OR STEEL COMP B1111 OR STEEL COMP B1112 OR STEEL COMP B1113 OR STEEL COMP 12L14 OR STEEL
METALLIC HARDNESS RATING	70.0 MINIMUM ROCKWELL B AND 99.5 MAXIMUM ROCKWELL B
SEAT ANGLE IN DEG	40.0
SLEEVE OUTSIDE DIAMETER	0.309 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
SPECIAL FEATURES	STYLE OF DESIGN AND DIM. APPLICABLE TO EACH STYLE ARE OPTIONAL FOR MS51825
STYLE DESIGNATOR	FLARELESS
SURFACE TREATMENT	CADMIUM AND CHROMATE

Click here to Register for Free 30-day Trial