| CONNECTION TYPE | THREADED EXTERNAL TUBE ALL ENDS |
| CONNECTION STYLE | FLARED (TUBE) 3RD END |
| CONNECTION STYLE | GASKET SEAL (TUBE) 1ST END |
| CONNECTION STYLE | GASKET SEAL (TUBE) 2ND END |
| LEG LENGTH | 1.000 INCHES NOMINAL 1ST END |
| LEG LENGTH | 1.000 INCHES NOMINAL 2ND END |
| LEG LENGTH | 1.328 INCHES MINIMUM AND 1.406 INCHES MAXIMUM 3RD END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-596,ALLOY 356 T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 356.0 OR ALUMINUM ALLOY OVERALL |
| MAXIMUM OPERATING PRESSURE | 125.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID 1ST RESPONSE |
| MEDIA FOR WHICH DESIGNED | OXYGEN, GASEOUS 2ND RESPONSE |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES 3RD END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.750 INCHES 1ST END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.750 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.438 INCHES 3RD END |
| NOMINAL THREAD SIZE | 1.250 INCHES 2ND END |
| NOMINAL THREAD SIZE | 1.250 INCHES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 3RD END |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| THREAD CLASS | 2A 1ST END |
| THREAD CLASS | 2A 2ND END |
| THREAD CLASS | 3A 3RD END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| THREAD SERIES DESIGNATOR | UNF 2ND END |
| THREAD SERIES DESIGNATOR | UNJF 3RD END |