| CONNECTION STYLE | FLARED (TUBE) 1ST END |
| CONNECTION STYLE | FLARED (TUBE) 2ND END |
| CONNECTION STYLE | FLARED W/ GASKET SEAL (BOSS) 3RD END |
| CONNECTION TYPE | THREADED EXTERNAL BOSS 3RD END |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 2ND END |
| LEG LENGTH | 2.351 INCHES NOMINAL 2ND END |
| LEG LENGTH | 3.429 INCHES NOMINAL 1ST END |
| LEG LENGTH | 1.268 INCHES NOMINAL 3RD END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 2014 OVERALL |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 1.500 INCHES 1ST END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 1.500 INCHES 2ND END |
| NOMINAL THREAD SIZE | 1.875 INCHES 1ST END |
| NOMINAL THREAD SIZE | 1.875 INCHES 1ST END BULKHEAD |
| NOMINAL THREAD SIZE | 1.875 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.437 INCHES 3RD END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| SPECIFICATION/STANDARD DATA | 81343-AS1033 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE II MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| THREAD CLASS | 3A 1ST END BULKHEAD |
| THREAD CLASS | 3A ALL ENDS |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD QUANTITY PER INCH | 12 1ST END BULKHEAD |
| THREAD QUANTITY PER INCH | 12 2ND END |
| THREAD SERIES DESIGNATOR | UNJ 1ST END |
| THREAD SERIES DESIGNATOR | UNJ 1ST END BULKHEAD |
| THREAD SERIES DESIGNATOR | UNJ 2ND END |
| THREAD SERIES DESIGNATOR | UNJF 3RD END |