|
|
|
National Stock Number:
4810-01-357-9464
Federal Supply Class:
4810
National Item Identification Number:
013579464
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| 1262-135-1 | 36334 | INDAL TECHNOLOGIES INC. | | WPK8300D64G 120/60 | 04845 | AUTOMATIC SWITCH COMPANY |
|
Techincal Specification:
| MATERIAL | COPPER ALLOY BODY | | STEEL COMP 303 FLOW CONTROL DEVICE | | COPPER ALLOY SEAT | | OFFSET DISTANCE | 1.875 INCHES | | FLOW CONTROL DEVICE | DISK | | MAXIMUM OPERATING PRESSURE | 120.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 200.0 DEG FAHRENHEIT SINGLE RESPONSE | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 120.0 AC | | FREQUENCY IN HERTZ | 60.0 | | PHASE | SINGLE | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | OPEN | | CONNECTION TYPE | THREADED INTERNAL PIPE ALL ENDS | | CONNECTION STYLE | PLAIN,OPTIONAL END(PIPE) ALL ENDS | | THREAD SERIES DESIGNATOR | NPT ALL ENDS | | NOMINAL THREAD SIZE | 0.375 INCHES ALL ENDS | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | MOUNTING POSITION | VERTICAL |
|
|