| BOLT CIRCLE NOMINAL DIAMETER | 11.875 INCHES 1ST END |
| BOLT HOLE NOMINAL DIAMETER | 1.188 INCHES 1ST END |
| BOLT HOLE QUANTITY | 12 1ST END |
| BONNET TYPE | INSIDE SCREW |
| BONNET ATTACHMENT METHOD | BOLTED |
| CONNECTION TYPE | FLANGE 1ST END |
| FACE TO FACE DISTANCE | 13.000 INCHES |
| FEATURES PROVIDED | BONNET PACKING |
| FIRST CONNECTION FACE TO CENTERLINE DISTANCE | 13.000 INCHES |
| FLANGE FACE DESIGN | RAISED STRAIGHT 1ST END |
| FLANGE SHAPE | ROUND WITH HOLES 1ST END |
| FLOW CONTROL DEVICE | DISK |
| MATERIAL | COBALT ALLOY SEAT |
| MATERIAL | STEEL BODY |
| MATERIAL | STEEL CORROSION RESISTING STEM |
| MATERIAL | STEEL FLOW CONTROL DEVICE |
| MAXIMUM OPERATING TEMP | 850.0 FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 600.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MEDIA FOR WHICH DESIGNED | STEAM SINGLE RESPONSE |
| NOMINAL OUTSIDE DIAMETER | 14.000 INCHES 1ST END |
| NOMINAL THICKNESS | 2.062 INCHES 1ST END |
| RAISED FACE NOMINAL DIAMETER | 10.625 INCHES 1ST END |
| RAISED FACE NOMINAL HEIGHT | 0.250 INCHES 1ST END |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY FIG 133 |
| RENEWABLE SEAT RING TYPE | THREADED |
| STYLE DESIGNATOR | ANGLE |
| TEST DATA DOCUMENT | 80064-DD692S4810-16 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| VALVE OPERATION METHOD | MANUAL |