5305-00-007-6213, SCREW,EXTERNALLY RELIEVED BODY

5305-00-007-6212 SCREW,EXTERNALLY RELIEVED BODY

5305-00-007-6214 SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-00-007-6213

Federal Supply Class:
5305

National Item Identification Number:
000076213

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

1120641-2	93907	TEXTRON FASTENING SYSTEMS DBA DECORAH OPERATIONS TFS
965336-2	82577	RAYTHEON COMPANY
A1C617-2	06725	SPS TECHNOLOGIES, LLC
AIC617-2	06725	SPS TECHNOLOGIES, LLC
CA1170-04-11	29372	HOWMET GLOBAL FASTENING SYSTEMS INC.

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.344 INCHES MINIMUM AND 0.349 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.532 INCHES MINIMUM AND 0.537 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.067 INCHES MINIMUM AND 0.072 INCHES MAXIMUM
HEAD DIAMETER	0.178 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD HEIGHT	0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
HEAD STYLE	FLAT CHAMFER
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	IRON ALLOY 660 OVERALL
MINIMUM TENSILE STRENGTH	140000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.112 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.188 INCHES MINIMUM
THREAD QUANTITY PER INCH	40
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial