|
|
|
National Stock Number:
5305-00-008-7868
Federal Supply Class:
5305
National Item Identification Number:
000087868
Description:
THUMBSCREW
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter. It may have an unthreaded portion with a diameter less than, equal to, or greater than the diameter of the threaded portion. It has either a vertically flattened, circular knurled, or wing type head, all of which are designed for rotation by the thumb and fingers. For items having wrenching facilities such as socket recess, multiple spline or slot heads, use SCREW (as modified) or BOLT (as modified).
|
Manufacturer Information:
| SM-B-208666-1 & -2 | 81337 | W1D1 NATICK SOLDIER CENTER | | SMB208666 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR |
|
Techincal Specification:
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 1.796 INCHES MINIMUM AND 1.828 INCHES MAXIMUM | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FASTENER LENGTH | 2.281 INCHES MINIMUM AND 2.312 INCHES MAXIMUM | | FIRST DIAMETER FROM HEAD | 0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM | | HEAD HEIGHT | 0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM | | HEAD STYLE | THUMB NO. 3 | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 304 OVERALL | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | POINT STYLE | CONE | | WIDTH BETWEEN FLATS | 1.046 INCHES MINIMUM AND 1.078 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.453 INCHES MINIMUM AND 0.516 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 20 | | THREAD SERIES DESIGNATOR | UNC |
|
|