|
|
|
National Stock Number:
5305-01-362-4458
Federal Supply Class:
5305
National Item Identification Number:
013624458
Description:
SCREW ASSEMBLY,PANEL
Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
|
Manufacturer Information:
| CA29040-02-2-4HS | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. |
|
Techincal Specification:
| FASTENER LENGTH | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM | | HEAD DIAMETER | 0.125 INCHES MINIMUM AND 0.155 INCHES MAXIMUM | | HEAD HEIGHT | 0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM | | HEAD STYLE | FILLISTER | | INTERNAL DRIVE STYLE | HEXAGON | | MATERIAL | STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L SPRINGSTEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L STAND-OFFSTEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L FASTENER | | NOMINAL THREAD DIAMETER | 0.086 INCHES | | WIDTH ACROSS FLATS | 0.078 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRINGQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFFQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER | | SURFACE TREATMENT | PASSIVATE SPRINGPASSIVATE STAND-OFFPASSIVATE FASTENER | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.078 INCHES MINIMUM AND 0.108 INCHES MAXIMUM | | THREAD CLASS | 3A | | THREAD QUANTITY PER INCH | 56 | | THREAD SERIES DESIGNATOR | UNC |
|
|