5305-01-364-3159, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-364-3159

Federal Supply Class:
5305

National Item Identification Number:
013643159

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

NAS1580V4T16D

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.262 INCHES MINIMUM AND 1.312 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	1.388 INCHES MINIMUM AND 1.418 INCHES MAXIMUM
GRIP DIAMETER	0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH	0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
HEAD HEIGHT	0.111 INCHES NOMINAL
HEAD STYLE	DOUBLE HEXAGON
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
MATERIAL DOCUMENT AND CLASSIFICATION	AMS4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	TITANIUM ALLOY UNS R56400 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.2500 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/STANDARD DATA	80205-NAS1580 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
WIDTH BETWEEN FLATS	0.464 INCHES MINIMUM AND 0.5066 INCHES MAXIMUM
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	3A
THREAD LENGTH	0.403 INCHES NOMINAL
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	28

Click here to Register for Free 30-day Trial