|
|
|
National Stock Number:
5305-01-370-9070
Federal Supply Class:
5305
National Item Identification Number:
013709070
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 01595-0065-0008 | 59885 | ROSEMOUNT AEROSPACE INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNRC | | NOMINAL THREAD DIAMETER | 0.112 INCHES | | THREAD QUANTITY PER INCH | 40 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.190 INCHES NOMINAL | | FASTENER LENGTH | 0.435 INCHES MINIMUM AND | | 0.445 INCHES MAXIMUM | | MATERIAL | IRON ALLOY 660 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | FILLISTER | | HEAD DIAMETER | 0.177 INCHES MINIMUM AND | | 0.183 INCHES MAXIMUM | | HEAD HEIGHT | 0.085 INCHES MINIMUM AND | | 0.090 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | HEXAGON | | WIDTH ACROSS FLATS | 0.0937 INCHES MINIMUM AND | | 0.0952 INCHES MAXIMUM | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FIRST DIAMETER FROM HEAD | 0.085 INCHES MINIMUM AND | | 0.090 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.245 INCHES MINIMUM AND | | 0.250 INCHES MAXIMUM |
|
|