|
|
|
National Stock Number:
5305-01-451-8894
Federal Supply Class:
5305
National Item Identification Number:
014518894
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| LD111-0045-2412 | 06710 | VALLEY-TODECO, INC. | | LD111-0045-2412 | 06725 | SPS TECHNOLOGIES, LLC | | LD111-0045-2412 | 17446 | HUCK INTERNATIONAL, INC | | LD111-0045-2412 | 27624 | SPS TECHNOLOGIES LLC | | LD111-0045-2412 | 43999 | THE BOEING COMPANY | | LD111-0045-2412 | 56878 | SPS TECHNOLOGIES, LLC | | LD111-0045-2412 | 57928 | SONIC INDUSTRIES, INC. | | LD111-0045-2412 | 73197 | HI-SHEAR CORPORATION | | LD111-0045-2412 | 80539 | SPS TECHNOLOGIES, LLC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 1.007 INCHES MINIMUM AND 1.037 INCHES MAXIMUM | | GRIP DIAMETER | 0.2646 INCHES MINIMUM AND 0.2651 INCHES MAXIMUM | | GRIP LENGTH | 0.0750 INCHES NOMINAL | | HEAD DIAMETER | 0.464 INCHES MINIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-13 OVERALL | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.397 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNJF |
|
|