|
|
|
National Stock Number:
5305-01-451-9021
Federal Supply Class:
5305
National Item Identification Number:
014519021
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| BACB30LH2-9 | 06710 | VALLEY-TODECO, INC. | | BACB30LH2-9 | 06725 | SPS TECHNOLOGIES, LLC | | BACB30LH2-9 | 17943 | FEDERAL MANUFACTURING CORP | | BACB30LH2-9 | 1RC86 | HOWMET GLOBAL FASTENING SYSTEMS INC | | BACB30LH2-9 | 27624 | SPS TECHNOLOGIES LLC | | BACB30LH2-9 | 56878 | SPS TECHNOLOGIES, LLC | | BACB30LH2-9 | 80539 | SPS TECHNOLOGIES, LLC | | BACB30LH2-9 | 81205 | THE BOEING COMPANY | | BACB30LH2-9 | 9N513 | VOI-SHAN/CHATSWORTH DIV OF VSI CORP SUB OF FAIRCHILD INDUSTRIES INC | | BACB30LH2-9 | Z03F0 | BOEING DEFENCE AUSTRALIA LTD | | BACB30LH2-9 | Z8T75 | BOEING DEFENCE AUSTRALIA LTD |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.892 INCHES MINIMUM AND 0.922 INCHES MAXIMUM | | GRIP DIAMETER | 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM | | GRIP LENGTH | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM | | HEAD DIAMETER | 0.255 INCHES MINIMUM AND 0.334 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | MATERIAL | IRON ALLOY 660 OVERALL | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.345 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNJF |
|
|