|
|
National Stock Number: 5305-01-452-9035
Federal Supply Class: 5305
National Item Identification Number: 014529035
Description: SCREW,EXTERNALLY RELIEVED BODY
Detail: An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
17649 | 28687 | NAVY, UNITED STATES DEPARTMENT OF THE SPAWAR DBA SPACE AND NAVAL WAFARE COMMAND | C-42SV0138 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | FASTENER LENGTH | 0.512 INCHES NOMINAL | FIRST DIAMETER FROM HEAD | 0.097 INCHES NOMINAL | HEAD DIAMETER | 0.302 INCHES MINIMUM AND 0.317 INCHES MAXIMUM | HEAD HEIGHT | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM | HEAD STYLE | FLAT FILLISTER | INTERNAL DRIVE STYLE | SLOT | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720, COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | MATERIAL | STEEL COMP 303 OVERALL | NOMINAL THREAD DIAMETER | 0.138 INCHES | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-13924, CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | SURFACE TREATMENT | OXIDE OVERALL | THREAD CLASS | 2A | THREAD DIRECTION | RIGHT-HAND | THREAD LENGTH | 0.375 INCHES MAXIMUM | THREAD QUANTITY PER INCH | 32 | THREAD SERIES DESIGNATOR | UNC |
|
|