5306-00-004-7042, BOLT,SHOULDER

5306-00-004-7044 BOLT,INTERNALLY RELIEVED BODY

National Stock Number:
5306-00-004-7042

Federal Supply Class:
5306

National Item Identification Number:
000047042

Description:
BOLT,SHOULDER

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.

Manufacturer Information:

A51C43594-11	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
A51C43594-11	61174	NORTHROP GRUMMAN SYSTEMS CORPORATION
A51C43594-11	79RG9	NORTHROP GRUMMAN SYSTEMS CORPORATION

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.956 INCHES MINIMUM AND 0.966 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	1.077 INCHES NOMINAL
HARDNESS RATING	46.0 ROCKWELL C MINIMUM AND 49.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.140 INCHES NOMINAL
HEAD STYLE	HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	G-1010,FSC-26512 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL OVERALL
NOMINAL THREAD DIAMETER	0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER	0.3731 INCHES MINIMUM AND 0.3737 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE	ROUND FIRST SHOULDER
SHOULDER LENGTH	0.748 INCHES MINIMUM AND 0.758 INCHES MAXIMUM FIRST SHOULDER
WIDTH BETWEEN FLATS	0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-8837,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
TEST DATA DOCUMENT	81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.319 INCHES MINIMUM AND 0.329 INCHES MAXIMUM
THREAD QUANTITY PER INCH	28
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial