5330-00-004-7177 SEAL,NONMETALLIC SPECIAL SHAPED Index 5330-00-004-7181 O-RING

National Stock Number:
5306-00-004-7178

Federal Supply Class:
5306

National Item Identification Number:
000047178

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.


Manufacturer Information:
FFS8581348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS51099-3596906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
FASTENER LENGTH1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM
FEATURES PROVIDEDFINISHED HEAD
HARDNESS RATING235.0 BRINELL STANDARD MAXIMUM OVERALL
HEAD HEIGHT0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM
HEAD STYLEHEXAGON
HOLE CONFIGURATION STYLEHEXAGON FLATS
HOLE DIAMETER0.062 INCHES NOMINAL
HOLE QUANTITY1
HOLE TYPEDRILLED
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP 410 OR STEEL COMP 416 OR STEEL COMP 430 OVERALL
MINIMUM TENSILE STRENGTH70000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH40000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.312 INCHES
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE
PART NAME ASSIGNED BY CONTROLLING AGENCYSCREW,CAP,HEXAGON HEAD (FINISHED HEXAGON BOLT),HEAD DRILLED FOR LOCKING WIRE, STEEL, CORROSION-RESISTING, PASSIVATED, UNC-21
WIDTH BETWEEN FLATS0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
SURFACE FINISH63.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.812 INCHES MINIMUM
THREAD QUANTITY PER INCH18
THREAD SERIES DESIGNATORUNC


Click here to Register for Free 30-day Trial