|
|
|
National Stock Number:
5306-00-022-2122
Federal Supply Class:
5306
National Item Identification Number:
000222122
Description:
BOLT,MACHINE
Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.
|
Manufacturer Information:
| 222122 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 222122 | 21450 | ARMY WEAPONS COMMAND ATTN AMSWE-REE-S | | 222122 | 24617 | GENERAL MOTORS CORP | | 222122 | 7X677 | GENERAL MOTORS LLC | | 5306000222122 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5306000222122 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | MS35763-1120 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS35763-520 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| FASTENER LENGTH | 1.718 INCHES MINIMUM AND 1.782 INCHES MAXIMUM | | FEATURES PROVIDED | FINISHED HEAD | | HARDNESS RATING | 96.0 ROCKWELL B MINIMUM AND 104.0 ROCKWELL B MAXIMUM OVERALL | | HEAD HEIGHT | 0.438 INCHES MINIMUM AND 0.458 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | LOCKING FEATURE | DISTORTIONS BEARING SURFACE OF HEAD | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1035 OVERALL | | MINIMUM YIELD STRENGTH | 85000 POUNDS PER SQUARE INCH | | MINIMUM TENSILE STRENGTH | 95000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.750 INCHES | | WIDTH BETWEEN FLATS | 0.985 INCHES MINIMUM AND 1.000 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OR ZINC OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.593 INCHES MINIMUM AND 1.718 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 16 |
|
|