5905-01-371-9363 RESISTOR,VARIABLE,NONWIRE WOUND, Index 5306-01-371-9365 BOLT,MACHINE

National Stock Number:
5306-01-371-9364

Federal Supply Class:
5306

National Item Identification Number:
013719364

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.


Manufacturer Information:
MIL-B-681280205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MIL-B-681281349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS270074-06-5696906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS20074-06-56D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH


Techincal Specification:
FASTENER LENGTH5.781 INCHES MINIMUM AND 5.828 INCHES MAXIMUM
FEATURES PROVIDEDCASEHARDENED
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.266 INCHES MINIMUM AND 0.297 INCHES MAXIMUM
HEAD STYLEHEXAGON
HOLE CONFIGURATION STYLEHEXAGON LONGITUDINAL HOLE
HOLE DIAMETER0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM
HOLE QUANTITY3
HOLE TYPEDRILLED
MATERIALSTEEL COMP 4140 OR STEEL COMP 4130 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 4037 OVERALL
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.375 INCHES
WIDTH BETWEEN FLATS0.554 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.640 INCHES MINIMUM AND 0.719 INCHES MAXIMUM
THREAD QUANTITY PER INCH16
THREAD SERIES DESIGNATORUNC


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us