5306-01-373-3005, BOLT,MACHINE

National Stock Number:
5306-01-373-3005

Federal Supply Class:
5306

National Item Identification Number:
013733005

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.

Manufacturer Information:

MS21250H09016

96906

MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

EXTENDED WASHER THICKNESS	0.133 INCHES NOMINAL
EXTENDED WASHER DIAMETER	0.928 INCHES MINIMUM AND 0.938 INCHES MAXIMUM
FASTENER LENGTH	1.872 INCHES NOMINAL
GRIP LENGTH	0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
HARDNESS RATING	39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.557 INCHES NOMINAL
HEAD STYLE	DOUBLE HEXAGON EXTENDED WASHER
HOLE CONFIGURATION STYLE	DOUBLE HEXAGON FLATS
HOLE DIAMETER	0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
HOLE QUANTITY	4
HOLE TYPE	DRILLED
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 4TH MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 6150 OVERALL
MINIMUM TENSILE STRENGTH	180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.562 INCHES
WIDTH BETWEEN FLATS	0.625 INCHES NOMINAL
SURFACE FINISH	32.0 MICROINCHES PRIMARY WASHER32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	3A
THREAD LENGTH	0.852 INCHES MINIMUM
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	18

Click here to Register for Free 30-day Trial