5306-01-452-4591, BOLT,CLOSE TOLERANCE

National Stock Number:
5306-01-452-4591

Federal Supply Class:
5306

National Item Identification Number:
014524591

Description:
BOLT,CLOSE TOLERANCE

Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.

Manufacturer Information:

121673-4-50	80539	SPS TECHNOLOGIES, LLC
ST3M735-4-50	76301	THE BOEING COMPANY

Techincal Specification:

FASTENER LENGTH	3.543 INCHES MINIMUM AND 3.563 INCHES MAXIMUM
GRIP DIAMETER	0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH	3.125 INCHES MINIMUM AND 3.141 INCHES MAXIMUM
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM FASTENER
HEAD HEIGHT	0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
HEAD STYLE	HEXAGON
PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT,CLOSE TOLER
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5673 ASSN STD 2ND MATERIAL RESPONSE RING
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL STD 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL STD 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL STD 3RD MATERIAL RESPONSE OR MIL-S-6758 MIL STD 4TH MATERIAL RESPONSE OR MIL-S-8503 MIL STD 5TH MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 630 OR STEEL COMP 631 RING
MATERIAL	STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 OR STEEL COMP 6150 OVERALL
NOMINAL THREAD DIAMETER	0.250 INCHES
SPECIAL FEATURES	DOUBLE SHEAR STRENGTH 9,300 LBS:ULTIMATE TENSILE STRENGTH 4,680 LBS
WIDTH BETWEEN FLATS	0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE RING
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416, TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
SURFACE TREATMENT	PASSIVATE RING
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.308 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
THREAD QUANTITY PER INCH	28
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial