|
|
|
National Stock Number:
5306-01-453-9544
Federal Supply Class:
5306
National Item Identification Number:
014539544
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 5793302 FIND 49 | 17283 | BEK, INC. | | 5793302 FIND 49 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6393072-06 | 31442 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 6393072-6 | 31442 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 6393072-6 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.000 INCHES NOMINAL FIRST HOLE | | FASTENER LENGTH | 1.610 INCHES MINIMUM AND 1.630 INCHES MAXIMUM | | GRIP DIAMETER | 0.497 INCHES MINIMUM AND 0.498 INCHES MAXIMUM | | GRIP LENGTH | 1.120 INCHES MINIMUM AND 1.140 INCHES MAXIMUM | | HEAD HEIGHT | 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY 718 OVERALL | | NOMINAL THREAD DIAMETER | 0.500 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE | | SPECIAL FEATURES | SURFACE TREATMENT: ALUMIZITE "Z" SUPPLIED BY TIODIZE, CAGE 34568 | | WIDTH BETWEEN FLATS | 0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-85614 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ALUMINUM OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.490 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 13 | | THREAD SERIES DESIGNATOR | UNC |
|
|