5935-01-454-7300 CONNECTOR,RECEPTACLE,ELECTRICAL Index 5305-01-454-7302 SCREW,CAP,SOCKET HEAD

National Stock Number:
5306-01-454-7301

Federal Supply Class:
5306

National Item Identification Number:
014547301

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
AIC515-16A-5606725SPS TECHNOLOGIES, LLC
GB511W16A5626512NORTHROP GRUMMAN SYSTEMS CORPORATION


Techincal Specification:
EXTENDED WASHER DIAMETER1.615 INCHES MINIMUM AND 1.625 INCHES MAXIMUM
EXTENDED WASHER THICKNESS0.212 INCHES MINIMUM AND 0.232 INCHES MAXIMUM
FASTENER LENGTH4.794 INCHES MINIMUM AND 4.824 INCHES MAXIMUM
GRIP DIAMETER0.9980 INCHES MINIMUM AND 0.9990 INCHES MAXIMUM
GRIP LENGTH3.490 INCHES MINIMUM AND 3.510 INCHES MAXIMUM
HARDNESS RATING46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.913 INCHES MINIMUM AND 0.933 INCHES MAXIMUM
HEAD STYLEDOUBLE HEXAGON W/HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER1.000 INCHES
WIDTH BETWEEN FLATS1.052 INCHES MINIMUM AND 1.064 INCHES MAXIMUM
SURFACE TREATMENTCADMIUM OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH1.309 INCHES NOMINAL
THREAD QUANTITY PER INCH14
THREAD SERIES DESIGNATORUNJF


Click here to Register for Free 30-day Trial