5306-01-456-6979, BOLT,SHEAR

4010-01-456-6980 WIRE ROPE ASSEMBLY,SINGLE LEG

National Stock Number:
5306-01-456-6979

Federal Supply Class:
5306

National Item Identification Number:
014566979

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

S4928913-10-35	06725	SPS TECHNOLOGIES, LLC
S4928913-10-35	06950	HOWMET GLOBAL FASTENING SYSTEMS INC
S4928913-10-35	0K620	SEQUENCE SUPPORT SERVICES INC
S4928913-10-35	17446	HUCK INTERNATIONAL, INC
S4928913-10-35	27624	SPS TECHNOLOGIES LLC
S4928913-10-35	50945	MERCURY AEROSPACE FASTENERS INC
S4928913-10-35	56878	SPS TECHNOLOGIES, LLC
S4928913-10-35	88277	THE BOEING COMPANY
S4928913-10-35	97928	HUCK INTL INC

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	2.544 INCHES MINIMUM AND 2.559 INCHES MAXIMUM THREADS
FASTENER LENGTH	2.716 INCHES MINIMUM AND 2.746 INCHES MAXIMUM
GRIP DIAMETER	0.623 INCHES MINIMUM AND 0.624 INCHES MAXIMUM
GRIP LENGTH	2.178 INCHES MINIMUM AND 2.198 INCHES MAXIMUM
HEAD HEIGHT	0.312 INCHES MINIMUM AND 0.327 INCHES MAXIMUM
HEAD STYLE	DISHED HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 4340 OR STEEL COMP 8735 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH	95000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.625 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM THREADS
SPECIAL FEATURES	TWO HOLES IN THREADS AT 90 DEGREES ANGULAR
WIDTH BETWEEN FLATS	0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-C-320, TYPE 1, CLASS2 FED SPEC SINGLE TREATMENT RESPONSE BEARING SURFACE OF HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-C-320, TYPE 1, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416, TYPE 2, CLASS 2 FED SPEC ALL TREATMENT RESPONSES FASTENER
SURFACE TREATMENT	CHROMIUM BEARING SURFACE OF HEAD
SURFACE TREATMENT	CHROMIUM GRIP
SURFACE TREATMENT	CADMIUM AND CHROMATE FASTENER
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.543 INCHES NOMINAL
THREAD QUANTITY PER INCH	18
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial