5306-01-459-0860, BOLT,SHEAR

5340-01-459-0861 DEFLECTOR,DIRT AND LIQUID

National Stock Number:
5306-01-459-0860

Federal Supply Class:
5306

National Item Identification Number:
014590860

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

S4928913-4D16	06725	SPS TECHNOLOGIES, LLC
S4928913-4D16	06950	HOWMET GLOBAL FASTENING SYSTEMS INC
S4928913-4D16	0K620	SEQUENCE SUPPORT SERVICES INC
S4928913-4D16	17446	HUCK INTERNATIONAL, INC
S4928913-4D16	27624	SPS TECHNOLOGIES LLC
S4928913-4D16	50945	MERCURY AEROSPACE FASTENERS INC
S4928913-4D16	56878	SPS TECHNOLOGIES, LLC
S4928913-4D16	88277	THE BOEING COMPANY
S4928913-4D16	97928	HUCK INTL INC

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.998 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH	1.301 INCHES MINIMUM AND 1.331 INCHES MAXIMUM
GRIP DIAMETER	0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH	0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
HEAD HEIGHT	0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD STYLE	DISHED HEXAGON
HOLE CONFIGURATION STYLE	HEXAGON CORNERS
HOLE DIAMETER	0.036 INCHES MINIMUM AND 0.056 INCHES MAXIMUM
HOLE QUANTITY	3
HOLE TYPE	DRILLED
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS	0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE FINISH	63.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-C-320 CL2 TY1 FED SPEC SINGLE TREATMENT RESPONSE BEARING SURFACE OF HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-C-320 CL2 TY1 FED SPEC SINGLE TREATMENT RESPONSE GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT	CHROMIUM BEARING SURFACE OF HEAD
SURFACE TREATMENT	CHROMIUM GRIP
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	3A
THREAD LENGTH	0.316 INCHES NOMINAL
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	28

Click here to Register for Free 30-day Trial