|
|
|
National Stock Number:
5307-00-014-7716
Federal Supply Class:
5307
National Item Identification Number:
000147716
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 147716 | 12204 | DAIMLER CHRYSLER | | 147716 | 21450 | ARMY WEAPONS COMMAND ATTN AMSWE-REE-S | | 147716 | 24617 | GENERAL MOTORS CORP | | 147716 | 91209 | GENERAL MOTORS CORP ACCESSORY AND PARTS DIV | | 854773 | 12603 | CLARK EQUIPMENT CO | | 854773 | 77237 | DANA OFF HIGHWAY PRODUCTS, LLC |
|
Techincal Specification:
| OVERALL LENGTH | 1.000 INCHES NOMINAL | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | SURFACE TREATMENT | CADMIUM OR ZINC OVERALL | | THREAD CLASS | 2A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.375 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 0.437 INCHES MINIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 20 STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | THREAD PITCH DIAMETERS | +0.2190 TO 0.2210 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|