|
|
|
National Stock Number:
5310-00-008-5708
Federal Supply Class:
5310
National Item Identification Number:
000085708
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| A51B92311-11 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51B92311-11 | 61174 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51B92311-11 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| DRILLED HOLE DIAMETER | 0.062 INCHES NOMINAL | | DRIVE POINT DEPTH | 0.091 INCHES NOMINAL | | DRIVE POINT QUANTITY | 4 | | DRIVE POINT WIDTH | 0.250 INCHES NOMINAL | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT | | HOLE CONFIGURATION STYLE | CONFIGURATION F | | HOLE TYPE AND QUANTITY | 2 DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | IRON ALLOY 660 OVERALL | | NOMINAL THREAD SIZE | 2.000 INCHES | | NUT DIAMETER | 2.682 INCHES NOMINAL | | NUT STYLE | ROUND | | NUT THICKNESS | 0.740 INCHES NOMINAL | | SMALL END DIAMETER | 2.428 INCHES NOMINAL | | TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 16 | | THREAD SERIES | UN | | UNDERCUT THICKNESS | 0.240 INCHES NOMINAL |
|
|