|
|
|
National Stock Number:
5310-00-009-5661
Federal Supply Class:
5310
National Item Identification Number:
000095661
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| LD137-0026-2003 | 43999 | THE BOEING COMPANY | | S1026614-4-003 | 10630 | ANILLO INDUSTRIES INC | | S1026614-4-003 | 23294 | AVALON MACHINE PRODUCTS INC | | S1026614-4-003 | 70265 | ALL POWER MANUFACTURING CO. | | S1026614-4-003 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.2500 INCHES NOMINAL | | OVERALL DIAMETER | 0.3760 INCHES MINIMUM AND 0.3765 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-6736,COND N MIL SPEC 1ST MATERIAL RESPONSE OR AMS 6372 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4130 OR STEEL COMP 4135 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THICKNESS | 0.084 INCHES MINIMUM AND 0.094 INCHES MAXIMUM |
|
|