|
|
|
National Stock Number:
5310-00-009-9248
Federal Supply Class:
5310
National Item Identification Number:
000099248
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| BACW10BP3ACU | 81205 | THE BOEING COMPANY | | BACW10BP3ACU | Z03F0 | BOEING DEFENCE AUSTRALIA LTD | | BACW10BP3ACU | Z8T75 | BOEING DEFENCE AUSTRALIA LTD |
|
Techincal Specification:
| HOLE DIAMETER | 0.192 INCHES MINIMUM AND 0.196 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.369 INCHES MINIMUM AND 0.389 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM | | MINIMUM TENSILE STRENGTH | 140000 POUNDS PER SQUARE INCH | | RECESS ANGLE | 90.0 DEGREES NOMINAL | | RECESS DIAMETER | 0.282 INCHES NOMINAL | | SPECIFICATION/STANDARD DATA | 81205-BACW10BP MANUFACTURERS STANDARD | | STYLE DESIGNATOR | RECESSED |
|
|