|
|
|
National Stock Number:
5310-00-010-3342
Federal Supply Class:
5310
National Item Identification Number:
000103342
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 0912298 | 92392 | ALLIS-CHALMERS CORP | | 0912298-7 | 92392 | ALLIS-CHALMERS CORP | | 103342 | 12204 | DAIMLER CHRYSLER | | 103342 | 24617 | GENERAL MOTORS CORP | | 103342 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC | | 103342 | 7X677 | GENERAL MOTORS LLC | | 11185A | 1ML14 | BRINKLEY TECHNOLOGY GROUP LLC | | 11185A | 28265 | HERCULES ENGINE CO INC | | 202555 | 02978 | RENK AMERICA LLC | | 27199 | 33116 | KELSEY-HAYES CO WHEEL DRUM AND BRAKE DIV | | 34748S | 23040 | FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES | | 41911E3 | 09386 | ALLIEDSIGNAL INC ALLIEDSIGNAL BRAKING SYSTEMS-WHEEL END PRODUCTS | | 62.51.023 | 0124B | SAPA OPERACIONES SL | | 912298 | 92392 | ALLIS-CHALMERS CORP | | BEBX1L | 00000 | ORDNANCE CORPS | | MILW1085TYPEA | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | WA1030 | 73830 | GERSTENLAGER CO THE | | WA37 | 3D6E9 | MERITOR INDUSTRIAL PRODUCTS, LLC | | WA37 | 78500 | MERITOR HEAVY VEHICLE SYSTEMS, LLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.469 INCHES NOMINAL | | OVERALL DIAMETER | 0.922 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633,COMP FS1010-CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.065 INCHES NOMINAL |
|
|