|
|
|
National Stock Number:
5310-00-010-3347
Federal Supply Class:
5310
National Item Identification Number:
000103347
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 0911116 | 92392 | ALLIS-CHALMERS CORP | | 0911116-2 | 6N299 | AGCO CORP PARTS OPN | | 103347 | 0A335 | LINEAR MOTION LLC | | 103347 | 23705 | FRUEHAUF CORP | | 103347 | 24617 | GENERAL MOTORS CORP | | 103347 | 52788 | GENERAL MOTORS CORP SAGINAW DIV | | 103347 | 7X677 | GENERAL MOTORS LLC | | 29034 | 04627 | HYSTER-YALE GROUP, INC. | | 29034 | 30076 | HYSTER-YALE GROUP, INC. | | 5433 | 73460 | EATON CORP TRANSMISSION DIV | | 60192H | 04627 | HYSTER-YALE GROUP, INC. | | 60192H | 30076 | HYSTER-YALE GROUP, INC. | | 60192H | 31007 | NAVISTAR INTL CORP | | 70911116 | K5770 | H M PLANT LIMITED | | 8630-36-18 | 08315 | HIGHWAY PRODUCTS INC | | 8630-36-18 | 98042 | MARINETTE MARINE CORPORATION | | 911116 | 92392 | ALLIS-CHALMERS CORP | | 911116 | K5770 | H M PLANT LIMITED | | FFW92TYPEAGRADE1 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.9375 INCHES NOMINAL | | OVERALL DIAMETER | 1.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633-CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1010 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.134 INCHES NOMINAL |
|
|