5310-00-011-4618, WASHER,LOCK

National Stock Number:
5310-00-011-4618

Federal Supply Class:
5310

National Item Identification Number:
000114618

Description:
WASHER,LOCK

Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces

Manufacturer Information:

0910979	92392	ALLIS-CHALMERS CORP
0910979-4	92392	ALLIS-CHALMERS CORP
114618	24617	GENERAL MOTORS CORP
114618	7X677	GENERAL MOTORS LLC
21633	64104	DRESSER, LLC
910979	92392	ALLIS-CHALMERS CORP
BEAX4G	00000	ORDNANCE CORPS
MILW6986TYPEC	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

COUNTERSINK ANGLE	80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
HOLE DIAMETER	0.383 INCHES MINIMUM AND 0.398 INCHES MAXIMUM
OUTSIDE DIAMETER	0.765 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	-QQ-S-633 CANC FED SPEC 1ST MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 2ND MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 3RD MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 4TH MATERIAL RESPONSE OR -QQ-S-633 CANC FED SPEC 5TH MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS	0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM
MATERIAL	STEEL COMP 1060 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL
NONDEFINITIVE SPEC/STD DATA	C TYPE
STYLE DESIGNATOR	COUNTERSINK EXTERNAL TEETH

Click here to Register for Free 30-day Trial