|
|
|
National Stock Number:
5310-00-011-4949
Federal Supply Class:
5310
National Item Identification Number:
000114949
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 114949 | 12204 | DAIMLER CHRYSLER | | 114949 | 24617 | GENERAL MOTORS CORP | | 114949 | 7X677 | GENERAL MOTORS LLC | | D11076-15-7 | 91340 | MET-PRO CORPORATION | | D11076-15A7 | 91340 | MET-PRO CORPORATION | | FFW92 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | Y18813H | 64104 | DRESSER, LLC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM | | OVERALL DIAMETER | 0.993 INCHES MINIMUM AND 1.030 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613,COMP 11 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY OVERALL | | NONDEFINITIVE SPEC/STD DATA | A TYPE AND 1 GRADE AND E CLASS | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.064 INCHES MINIMUM AND 0.104 INCHES MAXIMUM |
|
|