|
|
|
National Stock Number:
5310-00-013-1084
Federal Supply Class:
5310
National Item Identification Number:
000131084
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 0912303 | 92392 | ALLIS-CHALMERS CORP | | 0912303-5 | 6N299 | AGCO CORP PARTS OPN | | 131084 | 24617 | GENERAL MOTORS CORP | | 90369 | 08645 | BRIGGS AND STRATTON CORP | | 912303 | 92392 | ALLIS-CHALMERS CORP | | FFW84CLASSASTYLE3 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | H965170405 | 88818 | KEARFOTT CORPORATION | | MS35339-2 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.115 INCHES MINIMUM AND 0.124 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.226 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 MIL STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.031 INCHES MINIMUM AND 0.037 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | NONDEFINITIVE SPEC/STD DATA | 3 STYLE AND A CLASS | | STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND |
|