|
|
|
National Stock Number:
5310-00-013-1098
Federal Supply Class:
5310
National Item Identification Number:
000131098
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 12X199 | 83120 | PRESSED METALS OF AMERICA INC | | 131098 | 24617 | GENERAL MOTORS CORP | | 34845S7S8 | 23040 | FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES | | 34845S7S8 | 57526 | FORD MOTOR COMPANY | | FFW84CLASSASTYLE3 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS35339-25 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | X1022 | 76040 | MACK TRUCKS INC PARTS OPN | | X1022 | 77260 | PIERCE CO INC THE SUB OF AVIS INDUSTRIAL CORP |
|
Techincal Specification:
| HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM | | HOLE DIAMETER | 0.255 INCHES MINIMUM AND 0.267 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.495 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66,AISI C1060 THRU C1080 OR SAE 1060 THRU 1080 MIL STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.077 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | NONDEFINITIVE SPEC/STD DATA | 3 STYLE AND A CLASS | | STYLE DESIGNATOR | SPLIT HELICAL-RIGHT HAND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,OR QQ-Z-325 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OR ZINC OVERALL |
|