|
|
|
National Stock Number:
5310-00-013-4512
Federal Supply Class:
5310
National Item Identification Number:
000134512
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| 134512 | 12204 | DAIMLER CHRYSLER | | 134512 | 21450 | ARMY WEAPONS COMMAND ATTN AMSWE-REE-S | | 134512 | 24617 | GENERAL MOTORS CORP | | 134512 | 7X677 | GENERAL MOTORS LLC | | 1518 | 78189 | ITW SHAKEPROOF AUTOMOTIVE PRODUCTS | | BEAX4F1 | 00000 | ORDNANCE CORPS | | MILW6986TYPEC | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM | | HOLE DIAMETER | 0.318 INCHES MINIMUM AND 0.333 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.599 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | -QQ-S-633 CANC FED SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL THICKNESS | 0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM | | MATERIAL | STEEL COMP 1060 OR STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1075 OR STEEL COMP 1080 OVERALL | | NONDEFINITIVE SPEC/STD DATA | C TYPE | | STYLE DESIGNATOR | COUNTERSINK EXTERNAL TEETH | | SURFACE TREATMENT | CADMIUM OR ZINC OVERALL |
|