|
|
|
National Stock Number:
5310-00-023-1708
Federal Supply Class:
5310
National Item Identification Number:
000231708
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 895009-74 | 89305 | SIMMONDS PRECISION PRODUCTS INC |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HEAT TREATMENT | AS FABRICATED | | HOLE DIAMETER | 0.078 INCHES MINIMUM AND 0.080 INCHES MAXIMUM | | OVERALL DIAMETER | 0.151 INCHES MINIMUM AND 0.156 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC 1ST MATERIAL RESPONSE AND QQ-S-766 FED SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OR STEEL COMP 304 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.003 INCHES MINIMUM AND 0.008 INCHES MAXIMUM |
|
|