5910-01-370-0658 CAPACITOR,FIXED,CERAMIC DIELECTR Index 5310-01-370-0660 WASHER,FLAT

National Stock Number:
5310-01-370-0659

Federal Supply Class:
5310

National Item Identification Number:
013700659

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
NAS1515D7L80205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.443 INCHES MINIMUM AND 0.463 INCHES MAXIMUM
OVERALL DIAMETER0.745 INCHES MINIMUM AND 0.770 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-6855,CL 2,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALRUBBER SYNTHETIC OVERALL
PERIPHERAL SHAPE STYLEROUND
SPECIAL FEATURESCOLOR GREEN
SPECIFICATION/STANDARD DATA80205-NAS1515 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THICKNESS0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM


Click here to Register for Free 30-day Trial