5365-01-370-8328 SPACER,SLEEVE Index 5365-01-370-8330 SPACER,SLEEVE

National Stock Number:
5310-01-370-8329

Federal Supply Class:
5310

National Item Identification Number:
013708329

Description:
NUT,SLEEVE

Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.


Manufacturer Information:
1701160-505869RAYTHEON COMPANY


Techincal Specification:
CROSS-SECTIONAL SHAPEROUND NUT
FLANGE DIAMETER0.584 INCHES NOMINAL
NUT DIAMETER0.360 INCHES MINIMUM AND 0.365 INCHES MAXIMUM
NUT STYLESLEEVE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-290 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALNICKEL OVERALL
NOMINAL THREAD SIZE0.250 INCHES
THREAD CLASS2B
THREAD DIRECTIONRIGHT-HAND
THREAD SERIESUNF
THREAD QUANTITY PER INCH28


Click here to Register for Free 30-day Trial