|
|
|
National Stock Number:
5310-01-371-5913
Federal Supply Class:
5310
National Item Identification Number:
013715913
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 80344-1 | 82340 | L3HARRIS TECHNOLOGIES, INC. |
|
Techincal Specification:
| COUNTERBORE DIAMETER | 2.500 INCHES MINIMUM AND 2.525 INCHES MAXIMUM FIRST END | | CROSS-SECTIONAL SHAPE | ROUND NUT | | FLANGE DIAMETER | 5.500 INCHES NOMINAL | | FLANGE THICKNESS | 0.500 INCHES NOMINAL | | MATERIAL | STEEL COMP 1010 OVERALL | | NUT DIAMETER | 4.498 INCHES MINIMUM AND 4.503 INCHES MAXIMUM | | NUT LENGTH | 2.000 INCHES NOMINAL | | NUT STYLE | SLEEVE | | SURFACE TREATMENT | CADMIUM OR CHROMIUM OVERALL | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES | ACME |
|
|