5305-01-450-5907 SETSCREW Index 5935-01-450-5909 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5310-01-450-5908

Federal Supply Class:
5310

National Item Identification Number:
014505908

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
10122334A486GNIMIKKEISTOKESKUS NCB FINLAND
500968513567ELBIT SYSTEMS OF AMERICA - NIGHT VISION LLC
500968554490DEPT OF THE ARMY U S ARMY ELECTRONICS COMMAND NIGHT VISION LABORATORY
5009685AC853BMA BUIZZA MAZZEI AGENCY SRL
5009685FAB60JENOPTEC
5602-10-1086928SEASTROM MANUFACTURING CO INC
FENNG196U1002FENN NIGHT VISION LIMITED


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.125 INCHES NOMINAL
OVERALL DIAMETER0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
MATERIALPAPER OVERALL
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.010 INCHES NOMINAL


Click here to Register for Free 30-day Trial