5340-01-452-5988 CLIP,SPRING TENSION Index 5340-01-452-5990 STANDOFF,THREADED,SPACING

National Stock Number:
5310-01-452-5989

Federal Supply Class:
5310

National Item Identification Number:
014525989

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
M19622/12-00681349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-S-19622/1281349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.435 INCHES NOMINAL
OVERALL DIAMETER0.615 INCHES NOMINAL
MATERIALPLASTIC POLYAMIDE OVERALL
PERIPHERAL SHAPE STYLEROUND
SPECIFICATION/STANDARD DATA81349-MIL-S-19622/12 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THICKNESS0.062 INCHES NOMINAL


Click here to Register for Free 30-day Trial