5905-01-453-2204 RESISTOR NETWORK,FIXED,FILM Index 5905-01-453-2206 RESISTOR,FIXED,FILM

National Stock Number:
5310-01-453-2205

Federal Supply Class:
5310

National Item Identification Number:
014532205

Description:
WASHER,FLAT

Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.


Manufacturer Information:
13303185-0010FCZ3RAYTHEON/LOCKHEED MARTIN JAVELIN JV
13303185-00118876U S ARMY AVIATION AND MISSILE COMMAND


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.128 INCHES MINIMUM AND 0.132 INCHES MAXIMUM
OVERALL DIAMETER0.307 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.005 INCHES MINIMUM AND 0.010 INCHES MAXIMUM


Click here to Register for Free 30-day Trial