|
|
|
National Stock Number:
5310-01-453-7813
Federal Supply Class:
5310
National Item Identification Number:
014537813
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| BACW10BP22CD | 10630 | ANILLO INDUSTRIES LLC | | BACW10BP22CD | 56878 | SPS TECHNOLOGIES, LLC | | BACW10BP22CD | 58009 | MOELLER MANUFACTURING & SUPPLY, LLC | | BACW10BP22CD | 6F140 | COMPONENT PRODUCTS CORPORATION | | BACW10BP22CD | 81205 | THE BOEING COMPANY | | CMTC-WASH-08-220-CD | 3GFX7 | CALIFORNIA MANUFACTURING TECHNOLOGY CONSULTING |
|
Techincal Specification:
| HOLE DIAMETER | 1.375 INCHES MINIMUM AND 1.386 INCHES MAXIMUM | | OUTSIDE DIAMETER | 2.313 INCHES MINIMUM AND 2.336 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5525SFTT1ADCDA000 ASSN STD SINGLE MATERIAL RESPONSE AND MA000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL | | MATERIAL THICKNESS | 0.092 INCHES MINIMUM AND 0.108 INCHES MAXIMUM | | MATERIAL | IRON ALLOY 660 OVERALL | | RECESS DIAMETER | 1.552 INCHES MINIMUM AND 1.572 INCHES MAXIMUM | | RECESS ANGLE | 90.0 DEGREES NOMINAL | | STYLE DESIGNATOR | RECESSED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2, CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
|
|