|
|
|
National Stock Number:
5310-01-457-1597
Federal Supply Class:
5310
National Item Identification Number:
014571597
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 751-6402201 FIND 34 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 751-6402201-34 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 751-6402202 ITEM 34 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 751-6402202-34 | 53711 | NAVAL SEA SYSTEMS COMMAND | | FF-W-92 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | FF-W-92,TY A,GR-1,CL-F | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MS16212-8 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM | | OVERALL DIAMETER | 2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-591, 651 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY 651 OVERALL | | NONDEFINITIVE SPEC/STD DATA | A TYPE AND 1 GRADE | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQP-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.136 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
|
|