|
|
|
National Stock Number:
5310-01-457-5514
Federal Supply Class:
5310
National Item Identification Number:
014575514
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 12976331 | 19200 | US ARMY ARDEC RDECOM | | 12976331-2 | 076M6 | BAE SYSTEMS LAND & ARMAMENTS L.P. | | 12976331-2 | 19200 | US ARMY ARDEC RDECOM | | 12976331-2 | 80212 | BAE SYSTEMS LAND & ARMAMENTS L.P. |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.500 INCHES MINIMUM AND 0.506 INCHES MAXIMUM | | OVERALL DIAMETER | 1.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTMB36 FED SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | COPPER ALLOY 230 OR COPPER ALLOY 240 OR COPPER ALLOY 260 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | THICKNESS | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
|
|