|
|
|
National Stock Number:
5310-01-465-0750
Federal Supply Class:
5310
National Item Identification Number:
014650750
Description:
WASHER,LOCK
Detail:
A washer which is usually round with a centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces
|
Manufacturer Information:
| A3019064-17 | 31550 | L3HARRIS TECHNOLOGIES, INC. | | A3019064-17 | 51792 | APOLLO AEROSPACE COMPONENTS LLC | | A3019064-17 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | A3019064-17 | 8U495 | SPECIAL-T-METALS CO INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 301 OR | | STEEL COMP 302 OR | | STEEL COMP 303 OR | | STEEL COMP 304 OR | | STEEL COMP 305 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND | | 43.0 ROCKWELL C MAXIMUM | | STYLE DESIGNATOR | FLAT INTERNAL TEETH | | HOLE DIAMETER | 1.135 INCHES MINIMUM AND | | 1.155 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.315 INCHES MINIMUM AND | | 1.355 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.012 INCHES MINIMUM AND | | 0.032 INCHES MAXIMUM |
|