|
|
|
National Stock Number:
5310-01-544-0160
Federal Supply Class:
5310
National Item Identification Number:
015440160
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 0158-BB1 | 36MV0 | THE SHYFT GROUP USA, INC | | 05FWSAEB | 36MV0 | THE SHYFT GROUP USA, INC | | 120393 | 0SAT8 | KOMATSU AMERICA CORP. | | 1000496 | 1EFH8 | GENERAL DYNAMICS LAND SYSTEMS - FORCE PROTECTION INC. | | 10018861 | 61C19 | MIL-COTS CORPORATION | | 05FWSAEB | 8T496 | SPARTAN MOTORS INC | | 12759-00348 | 0Y3H3 | FASTENAL COMPANY | | 33114 | 0Y3H3 | FASTENAL COMPANY | | ESP-F-15.101-GS | 338X5 | ND DEFENSE LLC | | ESP-F-15.121-PP | 338X5 | ND DEFENSE LLC | | 120393 | 338X5 | ND DEFENSE LLC | | 28588R1 | 45RP7 | DRESSTA NORTH AMERICA LTD |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | COLOR | YELLOW OVERALL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HOLE DIAMETER | 0.339 INCHES MINIMUM AND 0.359 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER, FLAT | | PERIPHERAL SHAPE STYLE | ROUND | | PROPRIETARY CHARACTERISTICS | NPAC | | OVERALL DIAMETER | 0.681 INCHES MINIMUM AND 0.703 INCHES MAXIMUM | | SURFACE TREATMENT | ZINC OVERALL | | THICKNESS | 0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
|
|