|
|
|
National Stock Number:
5315-00-006-0819
Federal Supply Class:
5315
National Item Identification Number:
000060819
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 38-201-016 | 32024 | OMARK INDUSTRIES INC HYDRAULIC MATERIALS HANDLING DIV | | 5424016 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 5.125 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.500 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.125 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.375 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66 SAF 4140 FED STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PIN OVERALL LENGTH | 6.125 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.9950 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.375 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SPECIAL FEATURES | BOTH ENDS CENTER DRILLED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CHROMATE OVERALL |
|
|