| DIAMETER | 0.2490 INCHES MINIMUM AND 0.2498 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| FEATURES PROVIDED | CASEHARDENED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST HOLE DIAMETER | 0.078 INCHES MINIMUM AND 0.083 INCHES MAXIMUM |
| HARDNESS RATING | 42.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD STYLE | KNURLED NO. 1 |
| HEIGHT | 0.160 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP O2 OVERALL |
| PIN HEAD DIAMETER | 0.300 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| SPECIAL FEATURES | HEAD,POINTED,.010 IN. PORM .030 IN. SPHER R; HEAD ANGLE,.88 DEG PORM .92 DEG |
| STYLE DESIGNATOR | GROOVE |
| SURFACE FINISH | 16.0 MICROINCHES LONG SHANK |
| UNDER HEAD LENGTH | 0.760 INCHES MINIMUM AND 0.820 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.040 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |